COVIDIEN EEA™ TRIEEA(XL)33/31/28MT/XT Circular Stapler
COVIDIEN EEA™ Circular Stapler TRIEEA28MT,TRIEEA28XT,TRIEEA31MT,TRIEEA31XT,TRIEEAXL33MT,TRIEEAXL33XT
Phone:+86-21-54286005
Resources
TRIEEA-eea_Brochure-EN
Microsystem
Endoscopysystem
Energysystem
+86-21-54286005
info@tenmed.net
Room 602, Building 1, No. 111 Luxiang Road (Greenland Park Plaza), Baoshan District, Shanghai, China
COVIDIEN EEA™ Circular Stapler TRIEEA28MT,TRIEEA28XT,TRIEEA31MT,TRIEEA31XT,TRIEEAXL33MT,TRIEEAXL33XT
Phone:+86-21-54286005
TRIEEA-eea_Brochure-EN
360-DEGREE STAPLE LINE SECURITY.
FOR ALL AROUND CONFIDENCE.
EEA™ Circular Stapler with Tri-Staple™ Technology

EASIER TO FIRE.
EASIER TO HEAR AND FEEL WHEN YOU DO.
Three rows of varied height staples6

Same inner and outer lumen diameters as circular staplers with DST Series™ technology6

Tilt-top™ anvil facilitates removal

Better audible and tactile feedback9,†,‡

†Compared to two-row circular staplers.
‡16 out of 19 surgeons surveyed agreed.

The EEA™ circular stapler with Tri-Staple™ technology has a sloped cartridge face.

The EEA™ stapler with DST Series™ technology and the Ethicon™* ILS stapler each have a flat cartridge face.

The Tri-Staple™ technology’s sloped cartridge face delivers less stress on tissue compared to the Ethicon™* ILS stapler’s flat-faced cartridges during compression and clamping.11,†,§
SLOPED CARTRIDGE FACE FLAT CARTRIDGE FACE

†Compared to two-row circular staplers. ‡Preclinical results may not correlate with clinical performance in
humans. §Finite element analysis (FEA) was used to determine the strain profiles of three circular staplers
during clamp-up. The EEA™ circular stapler with Tri-Staple™ technology demonstrated a graduated
compression profile upon clamping.
STAPLE HEIGHT
RECOMMENDATIONS
EEA™ circular stapler with Tri-Staple™ technology
If you normally use a 4.8 mm green thick tissue circular stapler, or larger,for anastomosis, then you should consider converting to the black extra-thick EEA™ circular stapler with Tri-Staple™ technology.
The black stapler provides an approximate staple height of 4.0 mm, 4.5 mm,and 5.0 mm.

If you normally use a 4.8 mm green thick tissue circular stapler, or larger, for anastomosis,but the patient’s tissue
seems thinner than the indicated range,you should consider converting to the purple medium/thick EEA™ circular stapler with Tri-Staple™ technology.
The purple stapler provides an approximate staple height of 3.0 mm,3.5 mm, and 4.0 mm.

If a black extra-thick EEA™ circular stapler with Tri-Staple™ technology is not available, and the tissue exceeds the indicated range of either a 3.5 mm blue circular stapler or the purple medium/thick circular stapler, then you should consider using a 4.8 mm green thick tissue circular stapler with DST Series™ technology.
